Q: Can I order over the phone instead of doing so online?
A. Of course, we prefer speaking to people too. Our opening hours are Mon-Fri 10am to 4pm. Orders can be placed online anytime, but if you would like to speak to someone directly please call within these hours.
Please note that if your telephone order is larger than £1000, we may require further identification and checks before we can process.
Please call 01246 813131 to find out more.
A. We normally deliver direct to your door. However we do ask that if there are any access restrictions to your address you advise us by calling 01246 813131 or emailing sales@greentreedoors.co.uk. Most of our deliveries are carried out either in a 7.5T lorry or a long wheel base transit van.
Q. How quickly can I expect my order?A. If your items are in stock, we will deliver your order within 10 working days to mainland UK. On the very rare occasion you place an order and one or more of your items are currently not in stock, we will contact you straight away to discuss your options.
Q. What forms of payment do you take?A. We accept all major credit and debit cards via our payment gateway, Shopify. If you would like to pay by American Express, you can do this via PayPal or Klarna. You can also pay on collection with either cash or card.
Q. Do you offer a fitting service?A. We do not offer a fitting service at this time. In general it is much more cost effective to use a local, reputable tradesperson.
Q. Where do your doors come from?A. In order to maintain the highest level of quality at fantastic prices, our doors are sourced from all over the world, including Spain, Indonesia, Malaysia and China.
Q. Can I arrange my Carpenter/Joiner before I receive my goods?A. Please do not arrange for your carpenter/joiner to fit your doors until you are certain the goods have arrived, been checked and are suitable for the installation intended. We cannot offer a refund or exchange if your goods have been ordered incorrectly and have already been installed.
Q. I have received my Bifold Doors but I didn't get/cannot locate the fitting instructions. How can I get a copy?A. All the documents required to fit your new Bifold System can be found here: Bifold Fitting Instructions, Bifold Fact Sheet, Frame Instructions and Frame Guide: Fitting Information – Green Tree Doors
Q. What does White Primed mean?A. Priming is a special paint that seals the wood and promote adhesion to the final finish. Our white primed doors come primed from the factory and are ready for final coat of paint for finishing.
Q. What does Unfinished mean?A. Unfinished internal doors are oak veneer doors which require sanding and sealing with oil or lacquer suitable for veneered doors to finish.
Q. How much can I trim off my door?A. All trimming recommendations are detailed in the Specification section of each product. For our standard doors (excluding rebated), we advise you to trim no more than 12mm from the width of the door (6mm from each side max) and 20mm from the top and bottom of the door (10mm from either edge max). Removing any more than this could damage the integrity of the door and as such we cannot accept any returns for doors that have been damaged due to too much being trimmed.
If you are purchasing a door from one of our UK suppliers (LPD or XL Joinery), the trimming details are different so please do refer to the specific product specification.
Please note that if you are removing anything from our pre-finished doors, you will need to refinish the door with a clear lacquer or similar. If you remove any from our white primed doors, you will also need to re-prime the affected areas. With our unfinished doors, we do recommend making sure all surfaces are smooth before finishing. Giving them a light sanding will help achieve this.
If in doubt, please call us on 01246 813131 or email us at sales@greentreedoors.co.uk.
Q. What does 'Oak Look' mean?A. All items described as oak look are suitable for use with oak products due to the colour match. All oak look items are manufactured in premium selected tropical hardwood and suitable for external use.
Q. Why do I need to trim my bifold frame?A. Our bifold frames are supplied in 4 different sizes and you will be supplied with a frame large enough for your opening. Because of this, you will need to cut the frame to the exact size required.
Q. What does 'Acid Etched' frosted glass mean?A. Our frosted glass doors are acid etched on one side, which means the other side has a smooth finish. Because of this, please check that you are hanging the doors the same way as light can reflect differently through the doors depending on which way round they are hung. After finishing the doors and prior to hanging, please remove the protective film to ensure you are hanging the doors with the frosted side of the glass facing the way you desire. If you are hanging the doors as a pair or a bifold, please ensure the frosted side faces the same way on each door.
Q. Why are there clear patches on my frosted glass?A. This effect is usually caused by a substance ‘filling in’ the glass etching and turning it almost transparent (usually caused by silicone). It can be removed with white spirits or methylated spirits and vigorous rubbing of the transparent patch. Once the spirit has been applied, please leave the glass to dry and it should become obscure again.
If in doubt, please contact us on 01246 813131 or email us at sales@greentreedoors.co.uk.
Q. Is the glass in your glass doors Safety Glass?A. Yes, all of the glass used in our pre-glazed doors is toughened 5mm safety glass and conforms to both British and European Standards.
Q. Do the prices on screen include VAT?A. Yes, all our prices shown on our website include VAT and Standard UK Mainland Delivery.
Q. What does the code 'RM2S' mean?A. The ‘RM’ refers to the mouldings. Raised Mouldings are separately machined beads fixed to the face of the door. Raised mouldings are applied around fielded panels and glass openings to give the door a more traditional character and visual depth. The ‘2S’ means that the raised mouldings are on both sides of the door (2 sides).
Q. What does the flame logo mean?A. If you see the flame logo next to a door, this means that it is a fire rated door. A fire resistance rating relates to how long the door will hold back fire based on its resistance to temperature. All our fire doors are FD30 rated and as such achieve 30 minutes of fire protection. We currently have limited styles of fire doors available, however we will be increasing our range soon!
Q. Are your doors solid or of engineered construction?A. All of our doors are made using modern engineered construction techniques. These modern techniques help our doors to achieve better levels of performance and stability. Engineered production within the timber industry also helps reduce the environmental impact of timber-based products. Our engineered doors may contain laminated, MDF or particleboard components.
All our doors are constructed with dowels, which means they are jointed using dripped holes and fluted dowels. This method is widely used within the door industry and now has the added benefit of modern high-tech adhesives to give a strong, hard wearing joint.
Q. What product should I use to finish my doors?A. We recommend using a full paint finish (primer, undercoat, gloss) or high-performance stain/lacquer suitable for veneered doors.
Q. Do your doors come with a guarantee?A. All of our doors and hardware are guaranteed for five years against the occurrence of manufacturing faults.
The guarantee is conditional upon following and complying with the instructions and recommendations in our installation, care and maintenance instructions. This guarantee covers replacement of faulty parts only and does not cover incidental expenses.
All fully finished door sets come with finish guarantees. However they must be well maintained and re-coated as and when necessary before the coating breaks down. Moisture must not be allowed to penetrate the timber during the life of the product. It is very important that the finish on your door set is checked every six months for deterioration, and re-coated if necessary. This will maintain the decorative finish and ensure that no moisture enters the timber of the doors and frames during the life of the product, giving long lasting performance. All our finish guarantees are offered in accordance with EN927/1-7.
All our unfinished doorsets come with a 3 month guarantee subject to the following guidelines. We recommend finishing unfinished exterior door sets with a high build microporous wood coating system. This should consist of one coat of base stain and two coats of top coat, in a wood stain or paint colour of your choice.
After delivery, doorsets should be stored in a dry location, with doors and frames stored flat, slightly raised from the ground to ensure adequate air circulation. They MUST be decorated as soon as possible after delivery to stop moisture imbalances. All surfaces and edges of the doors and frames (even the back) must be coated with these three coats to adequately protect the timber and stop moisture getting in. The finish must be regularly maintained to ensure moisture does not penetrate into the timber during the life of the product. All surfaces must be treated/sealed at the same time to prevent distortion from moisture imbalance. Important: Unfinished sets must be decorated in accordance with British Standard Code of Practice BS 6150:1991 Painting of Buildings and BS 8000 Part 12 1989 – BEFORE the door set is installed. Failure to do so will invalidate the guarantee. We do not recommend finishing with Danish oil, wax or any finish other than a medium to high build microporous wood finishing system. Please note that the use of steel wool, or allowing steel or iron fragments to come into contact with the untreated oak timber or veneers may cause oxidisation resulting in black stain. Green Tree Doors will not take responsibility for any inappropriately decorated products and any faults arising therefrom.
If you have any further questions, then please give us a call on 01246 813131