White Primed Shaker 4 Light Frosted Internal Door Pair


White Primed Shaker 4 Light Frosted Internal Door Pair

In stock
Delivery period: 4 working days

£239.99


 

The White Shaker 4 Light Frosted Door Pair combines a classic shaker design with frosted glass. The frosted toughened safety glass allows for a high level of light to move between rooms, along with a good amount of privacy. This pair would look great in all homes and especially as a room divider between lounge and dining room. Our frosted glass is frosted using an acid etch technique. Supplied white primed ready for the final coat of paint on site.

The glass is 5mm thick and all glass has been toughened in accordance with BSEN 12150 and marked accordingly in the bottom right hand corner of each pane. Our frosted glass doors are acid etched on one side, which means the other side has a smooth finish. Because of this, please check that you are hanging the doors the same way as light can reflect differently through the doors depending on which way round they are hung. After finishing the doors and prior to hanging, please remove the protective film to ensure you are hanging the doors with the frosted side of the glass facing the way you desire. If you are hanging the doors as a pair or a bifold, please ensure the frosted side faces the same way on each door.

This pair comes with an unfinished Oak door pair maker which will require a coat of paint to match the doors.
You will need to cut the pair maker down to size in order for the height to match the height of the doors.

Approximate opening sizes required are:
Door_Pair_Table_minus_711

Advice before fitting your door pair maker:

The T Section/Pair Maker can be fitted to either door.
Decide which door you want to be the opening door - the pair maker piece will be fitted to the opposite door.
Ensure there is a small gap between the door edge and the door pair maker to prevent any rubbing.
It is always best to temporarily fit the pair maker first so you can test the opening and closing.
If there is rubbing, remove the pair maker and sand it down slightly.
Ensure the pair maker is flush with the top and bottom of the door.

This product is also available in...
Clear Glass   ✔ Unfinished   ✔ Bi-Fold   ✔ White Primed Single Door

Construction - Engineered with a solid core, veneer and lippings. Thickness per door - 35mm, Height per door 1981mm

Trimming our doors - we recommend removing a maximum of 12mm from the width of the door (6mm equally from each side) and 20mm from the height (10mm equally from each side). All our white primed doors need to be finished with a final coat of paint. Some of our doors come with a film on the glass to protect it from scratches. All you need to do is use a knife to cut around the edge of the glass and peel away the film.

Free delivery within 4 working days to UK Mainland.
Express delivery available at checkout from only £15.00.

Visit our delivery page to view detailed delivery information.

We also recommend


Customers who bought this product also bought


Browse these categories as well: Door Pairs, Pair Maker Pairs, Frosted Glazed Pair Maker Pairs, White Primed Pair Maker Pairs