The traditional and Victorian style 4 Panel RM0 Pair is supplied in unfinished oak with no raised mouldings. A fantastic, high quality set of doors, this design has been around for a long time and is very popular. Although this pair is of a Victorian, traditional design, it would suit any home. These doors are supplied unfinished ready for finishing on site. Keep it natural with a door oil, lacquer for that classic look, or paint them a bright colour for a modern style.
This pair comes with an unfinished Oak door pair maker which will require the same finish as the doors. You will need to cut the pair maker down to size in order for the height to match the height of the doors.
Approximate opening sizes required are:
The pair maker is 2.1m long and can be cut down to fit a standard sized internal door.
The small lip that goes around the back of the door is 3mm in size.
The width of the piece that lies between the 2 doors is 13mm.
The overall height of the piece is 51mm.
Advice before fitting your door pair maker:
The T Section/Pair Maker can be fitted to either door.
Decide which door you want to be the opening door - the pair maker piece will be fitted to the opposite door.
Ensure there is a small gap between the door edge and the door pair maker to prevent any rubbing.
It is always best to temporarily fit the pair maker first so you can test the opening and closing.
If there is rubbing, remove the pair maker and sand it down slightly.
Ensure the pair maker is flush with the top and bottom of the door.
This product is also available in...
✔ Single Door
Construction - Engineered with a solid core, oak veneer and lippings. Thickness per door - 35mm, Height per door 1981mm
Trimming our doors - we recommend removing a maximum of 12mm from the width of the door (6mm equally from each side) and 20mm from the height (10mm equally from each side).
Free delivery within 4 working days to UK Mainland.
Express delivery available at checkout from only £15.00.
Visit our delivery page to view detailed delivery information.