The Pre-finished Oak Shaker 4 Light Frosted Pair is one of our most popular designs and we can see why! The frosted toughened safety glass allows for plenty of light as well as privacy. The Pair are supplied finished and ready to hang; removing the need for further decoration. The doors are finished with a clear lacquer and once installed, can be enjoyed immediately. Our frosted glass is frosted using an acid etch technique.
The glass is 5mm thick and all glass has been toughened in accordance with BSEN 12150 and marked accordingly in the bottom right hand corner of each pane. Our frosted glass doors are acid etched on one side, which means the other side has a smooth finish. Because of this, please check that you are hanging the doors the same way as light can reflect differently through the doors depending on which way round they are hung. After finishing the doors and prior to hanging, please remove the protective film to ensure you are hanging the doors with the frosted side of the glass facing the way you desire. If you are hanging the doors as a pair or a bifold, please ensure the frosted side faces the same way on each door.
This pair comes with an unfinished Oak door pair maker which will require the same finish as the doors (clear lacquer).
You will need to cut the pair maker down to size in order for the height to match the height of the doors.
Approximate opening sizes required are:
The pair maker is 2.1m long and can be cut down to fit a standard sized internal door.
The small lip that goes around the back of the door is 3mm in size.
The width of the piece that lies between the 2 doors is 13mm.
The overall height of the piece is 51mm.
Advice before fitting your door pair maker:
The T Section/Pair Maker can be fitted to either door.
Decide which door you want to be the opening door - the pair maker piece will be fitted to the opposite door.
Ensure there is a small gap between the door edge and the door pair maker to prevent any rubbing.
It is always best to temporarily fit the pair maker first so you can test the opening and closing.
If there is rubbing, remove the pair maker and sand it down slightly.
Ensure the pair maker is flush with the top and bottom of the door.
This product is also available in...
✔ Unfinished ✔ Clear Glass ✔ White Primed ✔ Bi-Fold ✔ Pre-finished Single Door
Construction - Engineered with a solid core, veneer and lippings. Thickness per door - 35mm, Height per door 1981mm
Trimming our doors - we recommend removing a maximum of 12mm from the width of the door (6mm equally from each side) and 20mm from the height (10mm equally from each side).
Free delivery within 4 working days to UK Mainland.
Express delivery available at checkout from only £15.00.
Visit our delivery page to view detailed delivery information.